HYGHSPIN DOUBLE FLOW double-flow hygienic screw pump for high pressures

The HYGHSPIN Double Flow extends the application range of the HYGHSPIN series for high differential pressures of up to 50 bar. This makes it possible to utilize its advantages for high-pressure applications as well.

The HYGHSPIN Double Flow is a double-flow screw pump made of stainless steel. It has two external inlet ports and one central outlet port. A bearing on both sides controls the shaft deflection. The axial thrust caused by the high pressures is compensated internally. The shaft seals are located on the suction side. All in all, despite the high differential pressures, all major components are only subjected to low loads, resulting in high reliability and excellent service life. The parallel use of two stages also makes it possible to convey a large volume flow.

The HYGHSPIN Double Flow is the hygienic and gentle solution for high-pressure applications.

Maximum flow rate: 180 m3/h
Maximum delivery pressure: 20 bar
Maximum diameter of solids: 35 mm
Maximum viscosity: 1,000 Pa s